Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_RC3 (XEN3_DOM0) #0: Sun Mar 22 17:49:48 EET 2009
	root@jadis:/ker/compile/XEN3_DOM0
total memory = 256 MB
avail memory = 233 MB
timecounter: Timecounters tick every 10.000 msec
SMBIOS rev. 2.51 @ 0xdfeeb000 (33 entries)
mainbus0 (root)
mainbus0: scanning 0x9dc00 to 0x9dff0 for MP signature
mainbus0: scanning 0x9d800 to 0x9dbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf5f00
mainbus0: MP config table at 0x9e1a1, 444 bytes long
cpu0 at mainbus0 apid 0: (boot processor)
cpu1 at mainbus0 apid 1: (application processor)
cpu2 at mainbus0 apid 2: (application processor)
cpu3 at mainbus0 apid 3: (application processor)
ioapic0 at mainbus0 apid 4: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xfecc0000, virtual wire mode, version 20, 24 pins
ioapic2 at mainbus0 apid 6: pa 0xfecc0400, virtual wire mode, version 20, 24 pins
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: Intel 686-class, 2393MHz, id 0x6fb
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
acpi0 at hypervisor0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 2 at level 3
mpacpi: found subordinate bus 3 at level 3
mpacpi: failed to derive bus number, ignoring
mpacpi: found subordinate bus 14 at level 2
mpacpi: found subordinate bus 18 at level 2
mpacpi: found subordinate bus 19 at level 2
mpacpi: found subordinate bus 20 at level 2
mpacpi: 7 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (1/1)
mpacpi: ISA interrupt override 9 -> 9 (1/3)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 14 int routing
mpacpi: configuring PCI bus 18 int routing
mpacpi: configuring PCI bus 19 int routing
mpacpi: configuring PCI bus 20 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 29 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 29 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 29 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 29 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 31 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 31 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 0 attached to pci2 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci2 device 1 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 1 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 1 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci2 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 5 attached to pci2 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 6 attached to pci2 device 2 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 7 attached to pci2 device 2 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 0 attached to pci3 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 1 attached to pci3 device 1 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 2 attached to pci3 device 1 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 3 attached to pci3 device 1 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 8 attached to pci3 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 9 attached to pci3 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 4 attached to pci3 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 5 attached to pci3 device 3 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 6 attached to pci3 device 3 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 7 attached to pci3 device 3 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci14 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci14 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci14 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci14 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci18 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci19 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci20 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int9 189a0<vector=a0,delmode=1,logical,level,masked,dest=0> f000000<target=f>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
TIMR (PNP0100) [AT Timer] at acpi0 not configured
HPET (PNP0103) [HPET Timer] at acpi0 not configured
FWH (INT0800) [Intel FWH Random Number Generator] at acpi0 not configured
pckbc1 at acpi0 (KBC0, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13): aux port
pckbc2: irq 12
COM1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COM2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
FDC (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
pckbd0 at pckbc1 (kbd slot)
ioapic0: int1 9a8<vector=a8,delmode=1,logical,dest=0> f000000<target=f>
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
ioapic0: int12 9b0<vector=b0,delmode=1,logical,dest=0> f000000<target=f>
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2778 (rev. 0xc0)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2779 (rev. 0xc0)
pci1 at ppb0 bus 1
ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 0x09)
ppb1: disabling notification events
pci2 at ppb1 bus 2
ppb1: added to list as bus 2
pci2: i/o space, memory space enabled
vendor 0x8086 product 0x0326 (interrupt system, interface 0x20, revision 0x09) at pci1 dev 0 function 1 not configured
ppb2 at pci1 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 0x09)
ppb2: disabling notification events
pci3 at ppb2 bus 3
ppb2: added to list as bus 3
pci3: i/o space, memory space enabled
ppb3 at pci3 dev 3 function 0: vendor 0x8086 product 0x0335 (rev. 0x0a)
pci4 at ppb3 bus 4
ppb3: added to list as bus 4
pci4: i/o space, memory space enabled
arcmsr0 at pci4 dev 14 function 0ioapic2: int6 1a9b8<vector=b8,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f>

arcmsr0: interrupting at ioapic2 pin 6, event channel 5
arcmsr0: Areca ARC-1130 Host Adapter RAID controller
arcmsr0: 12 ports, 1024MB SDRAM, firmware <V1.43 2007-4-17>
scsibus0 at arcmsr0: 16 targets, 8 luns per target
vendor 0x8086 product 0x0327 (interrupt system, interface 0x20, revision 0x09) at pci1 dev 0 function 3 not configured
ppb4 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
pci5 at ppb4 bus 14
ppb4: added to list as bus 14
pci5: no spaces enabled!
ppb5 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
pci6 at ppb5 bus 18
ppb5: added to list as bus 18
pci6: i/o space, memory space enabled
wm0 at pci6 dev 0 function 0: Intel i82573E IAMT, rev. 3
ioapic0: int16 1a9c0<vector=c0,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f>
wm0: interrupting at ioapic0 pin 16, event channel 6
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:30:48:92:8b:ca
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci0 dev 28 function 5: vendor 0x8086 product 0x27e2 (rev. 0x01)
pci7 at ppb6 bus 19
ppb6: added to list as bus 19
pci7: i/o space, memory space enabled
wm1 at pci7 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
ioapic0: int17 1a9c8<vector=c8,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f>
wm1: interrupting at ioapic0 pin 17, event channel 7
wm1: PCI-Express bus
wm1: 256 word (8 address bits) SPI EEPROM
wm1: Ethernet address 00:30:48:92:8b:cb
makphy1 at wm1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
ioapic0: int23 1a9d0<vector=d0,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f>
uhci0: interrupting at ioapic0 pin 23, event channel 8
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
ioapic0: int19 1a9d8<vector=d8,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f>
uhci1: interrupting at ioapic0 pin 19, event channel 9
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
ioapic0: int18 1a921<vector=21,delmode=1,logical,actlo,level,masked,dest=0> f000000<target=f>
uhci2: interrupting at ioapic0 pin 18, event channel 10
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16, event channel 6
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23, event channel 8
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb7 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci8 at ppb7 bus 20
ppb7: added to list as bus 20
pci8: i/o space, memory space enabled
vga0 at pci8 dev 4 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
ioapic0: int14 929<vector=29,delmode=1,logical,dest=0> f000000<target=f>
piixide0: primary channel interrupting at ioapic0 pin 14, event channel 11
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
ioapic0: int15 931<vector=31,delmode=1,logical,dest=0> f000000<target=f>
piixide0: secondary channel interrupting at ioapic0 pin 15, event channel 12
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19, event channel 9 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
vendor 0x8086 product 0x27da (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
isa0 at ichlpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
ioapic0: int3 939<vector=39,delmode=1,logical,dest=0> f000000<target=f>
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Xen clock: using event channel 14
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
xenbus0: using event channel 15
sd0 at scsibus0 target 0 lun 0: <Areca, DOM0, R001> disk fixed
atapibus0 at atabus0: 2 targets
sd0: 238 GB, 52083 cyl, 20 head, 480 sec, 512 bytes/sect x 499999744 sectors
sd1 at scsibus0 target 0 lun 1: <Areca, DOMU, R001> disk fixed
sd1: 119 GB, 43402 cyl, 12 head, 480 sec, 512 bytes/sect x 249999872 sectors
cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8178, , PZ16> cdrom removable
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev0 at uhub4 port 7 configuration 1 interface 0
uhidev0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/0
ums0 at uhidev0
ums0: X report 0x0022 not supported
uhidev1 at uhub4 port 7 configuration 1 interface 1
uhidev1: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
raidattach: Asked for 8 units
Kernelized RAIDframe activated
Searching for RAID components...
boot device: sd0
root on sd0a dumps on sd0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
arcmsr0: normal state on 'RAID 0 volume0 (sd0)' (online)
arcmsr0: normal state on 'disk0 volume0 (sd0)' (online)
arcmsr0: normal state on 'RAID 0 volume1 (sd1)' (online)
arcmsr0: normal state on 'disk0 volume1 (sd1)' (online)
pid 6068 (nbmake), uid 0: exited on signal 11 (core not dumped, err = 27)